Skip to main content

Pascal Press Followup

So I've had Plenty of time with the Pascal Press, and I'm happy to say that it's found it's Niche in my coffee setup.

I first tried this as a daily driver, completely replacing my 20oz stainless steal mug.  That didn't last to long due to the thermal efficiency of the device.  you get an hour to an hour and a half of warm coffee, which is OK but a drastic difference from the old mug where I get 4+ hours.

I've also taken the press on a few camping trips now, and while this is where I was expecting the device to shine, it still lacks due to one major flaw: cleanup.  While the device removes most of the grounds in my experience it still required to disassemble and rinse each part to get all the grounds.  With access to a kitchen sink and a clean counter, sure no problem but camping it can be a bit of a hassle.  Not to mention that this is by definition a single cup brewer, so with a group of other coffee drinkers it's probably not the best option.

Where this device ended up shining for me, is wash and clean it at night, then in the morning I load clean grounds (right now I can fit 22g in it just fine) and then brew with the office kettle at around 2pm.  This works out great for me, as I don't need to keep a separate container for grounds, or risk the office coffee pot.

I'd probably still take it out camping too, as long as I'm the only coffee drinker, which seems unlikely at the moment, but we'll see.

Comments

Popular posts from this blog

8Bitdo NES 30 Pro on linux

This post will go over the setup I had to do to get my   8Bitdo  NES30 Pro controller working on my Arch linux desktop with steam.  This results in the system loading the xboxdrv automatically when the controller is connected, and unloading once finished. Firmware Update The first thing to tackle was the firmware update on the controller,  This may not be needed, but I like to keep my devices up to date. After some googling, I was able to find a program called fwupd  that's able to update the controller via a USB connection.  It's available for Arch in the community repo. The basic syntax of the command is: fwupdmgr get-devices fwupdmgr refresh fwupdmgr get-updatessudo fwupdmgr update The controller will need to be put into 'Firmware update mode'.  Be aware that the final command will also update all eligible firmware on your system, so If you don't want that, please dig into the documentation Bluetooth Connection G...

Craftware 1.17 on Arch Linux -- notes

Craftware a slicer for 3d printers is available for linux here .  It looks pretty good, and is supposedly multi threaded with support for hardware acceleration. I can only find it  as a deb file, and there's nothing in the AUR for it. I tried a few of the common methods for installing debs: debtap While it was able to create a package, upon installing it I got this error loading packages... error: failed to prepare transaction (package architecture is not valid) :: package craftware-1.17.1-1-i686 does not have a valid architecture So.. No good. I tried just extracting the package content, and running the binary: ./craftware: error while loading shared libraries: libomp.so: cannot open shared object file: No such file or directory and yes, it is installed. $ ldconfig -v           libomptarget.so -> libomptarget.so          libomp.so -> libomp.so          libzit...

The Saga of EA Customer support part 5

Jan 5, 2017  (14 Days after the initial contact) At 2:24 AM I was sent the following in reply to my 3rd ticket where I stated that I was going to become a nuisance. Thank you for contacting Electronic Arts Customer Experience. I sincerely apologize for the delay caused in responding to your issue and appreciate your patience. This is ***** from the Game team following up your incident.  I would like to inform you that your case was escalated to the dedicated team. In this case I suggest you to wait for email from the specialist team.  Should you have any further questions regarding this or any other issues, please do not hesitate to let us know. You can also find answers to common questions on our Help Center at http://help.ea.com , or ask our community experts by visiting Answer HQ at http://answers.ea.co This reply also closed the ticket. At 5:26 PM I replied with the following: Hi, Thank you for taking the time to update me on this issue. However:...